Phocos MPPT 100/20

Maximum Power Point Tracker

With innovative maximum-power-tracking technology, Phocos  MPP tracker ensures maximum performance from your solar array at all times and in any weather conditions. MPPT can yield energy gain of 15%-25% from your PV array.
When a Master Controller is used, up to 16 MPPT’s can be operated in parallel. This will enable you to increase your system capacity substantially. In addition, the charging regulation of each MPPT unit can be controlled by this master controller via data bus.
The temperature-compensated three-stage I-U curve charging regulation logarithm significantly extends the life span of your battery.

  • Maximum Power Point Tracking Technology increases the efficiency of your PV-system
  • Allows for the use of less expensive grid-connected modules for 12/24V stand-alone systems
  • Automatic 12/24 Volt detection
  • Temperature-Compensated three stage I-U curve Charging Regulation
  • Up to 16 units can be operated in parallel
  • Fully electronic protection (reverse polarity, over current, short-circuit, over temperature)
  • DIN Rail Compatible
  • Negative grounding
Article no. MPPT 100/20
Nominal voltage 12/24 V automatic recognition
Max. Solar input Voltage Voc 100 V
Max. Solar panel current 20 A
Power conversion efficiency Max. 97%
Standy power consumption << 1 W
Temperature compensation Yes
Max. wire size 16 mm2
Dimensions (wxhxd) 182x144x110mm
Temperature range -25 to +50 dgr
Type of protection IP22


Product images